fbpx

How to Use Pool Activator D

Restore sparkle to your pool

The once-a-month pool treatment for black & green algae

Cosave Powerbuild - Activator D (1)

What is Activator D?

The product comes in two bottles – a powder and a liquid – totalling 850 grams. This is enough for a 50,000 litre pool for one month. It is safe, environmentally friendly, economical and very effective.

A neglected pool will need a double-dose to start off, but this will effectively kill the algae and clear the water in a few days. Black algae will disappear over a few weeks, and should be brushed off the walls. (Chlorine does not kill algae, only bleaches it; this is why during a storm the chlorine is drawn from the water and the algae is once again visible, turning the water green.)

Activator D does not hurt eyes or skin, and swimming costumes last longer. It is environmentally friendly, non-toxic, non-corrosive and chlorine-free, and pool run-off water should not damage plants.

Take your pool from this...

Cosave Powerbuild Pool Activator D before (1)

To this...

Cosave Powerbuild Pool Activator D after (1)

How do i use Activator D?

Simply follow the 5 steps listed below to get a crystal clear pool with Activator D.

How to use pool activator d
STEP 1

Check the pH levels are between 6.8 – 7.2 and the alkalinity levels are between 80 – 120ppm

How to use pool activator d
STEP 2

Backwash pool for 3 to 5 minutes or until the water runs clear

How to use pool activator d
STEP 3

Disconnect pool cleaner hose from the weir, set the valve to filter (not circulate/bypass) and start the pool pump

How to use pool activator d
STEP 4

Pour both bottles into the weir/skimmer (not directly into the pool) and allow product to mix in

How to use pool activator d
STEP 5

Reconnect the pool cleaner hose and resume the normal pool pump and cleaning cycles. Backwash once a week and keeping the pool brushed and baskets clear

Shop Pool Activator D